Servo high output automatic sawing machine

Jianye Shunda machinery automatic sawing machine technical parameters:

Jianye Shunda machinery automatic sawing machine performance:

 National Unity Price: 69,000 yuan

Technical Parameters:

(1) servo system, servo motor.

(2) anti-skid function splint.

(3) welded frame and after finishing planer, ensure the accuracy of the saw edge.

(4) Automatic lifts.

(5) 6 blade (4 large 2 small), and the second saw underlined function to prevent the phenomenon of hair at the end.

(6) sawing size 1.22 / 1.24 meters --2.44 / 2.46 m, sawing 0.915 / 0.935 m -1.83 / 1.85 m.

(7) infrared positioning, rotation speed of 6,000 rpm, the tank saw head.

(8) using the rail crane installation process, reduce dust, increase the service life of the slide assembly.

(9) mechanical power is the soul, the use of spray dust cabinet, laser cutting production process, greatly increase the life of electrical appliances, ensure the stability of the equipment, reducing the electrical failure rate.

(10) with a bottom corner materials transport platform / push plate automatic lift function.

(11) sawing speed / yield / sawing effect is good / 19 seconds saw a cycle.

(12) for precise positioning plate

(13) Working pressure under normal use will not sawing waste "1" Zhang sheet

(14) with automatic fault detection function, fool operation. Emergence of the motor / electrical any failure, the system clearly tell you the point of failure, not a professional electrician can exclude

Servo Control System High Yield 1 Yield top table saw saw two other automated production

Example: Saw 18 PCT of plywood, 1 saw three, 19 seconds a cycle sawing, saw nine one minute, one hour saw 540, 10 hours 5400 (300 cubic meters)

1 2 top table saw saw production (service must be timely in the truck, tied a personal basis under the angle of the upper can be achieved)

                                                      Jianye Shunda Machinery